AG6 battery.Process flow of 18650 cylindrical battery sleeve labeling machine

18650 cylindrical battery process flow 1. Process 18650 cylindrical battery pack parameter settings are set by the touch screen, and the labeling machine automatically completes the following functions by PLC: artificial light packaging battery - motor + cylinder point material - chain car battery battery calibration + servo Tags - wrinkled surface pads checked again, since

18650 cylindrical battery process flow

1. Process

The parameter settings of the 18650 cylindrical battery pack are set by the touch screen, and the labeling machine automatically completes the following functions by PLC: artificial light packaging battery - motor + cylinder point material - chain car battery battery calibration + servo labeling - wrinkle surface pad re-inspection, self- Screw in material + tunnel furnace heat shrinkage - first cylinder to turn material - run with load -> turn second cylinder material (to complete the battery tank) - discharge chute; sound and light alarm equipment. The operating parameters can be set according to the actual requirements of customers.

2. Function description

The cylindrical battery cover marking machine is an automated equipment used for stamping and releasing cylindrical battery covers, insulating gaskets, and heat shrinkable marking covers. The equipment can package 4,000 standard batteries per hour, with a simple and elegant structural design and stable functions. Currently the most cost-effective complete set of standard equipment on the market.

3. Marking machine structure

1) The equipment has a compact and reasonable structure, beautiful appearance and small floor space.

2) The equipment is easy to operate and requires no professional training.

3) The equipment is controlled by PLC and is used for battery loading, setting standards, punching and folding pads, and heat shrinkable insulating standard leather. It is easy to operate, has high work efficiency, saves labor costs, and has good product performance.

4) Equipment data adopts high-quality thick cold-rolled sheets and aluminum profile frames.

5) The equipment is equipped with universal movable casters, making it easy to move.

Things to note when using sorting equipment

1. When starting up, check whether the actuators of the equipment are in the initial position, confirm that there are no other debris on the equipment, turn over the air source, confirm that the air source pressure is 0.5-0.6mpa, and then run the power control program:

2. Turn off the power and air source after the equipment is shut down:

3. When repairing, maintaining, and maintaining equipment, the power and air source should be turned off:

4. When placing the batteries to be separated into the charging box, try to ensure that the positive and negative poles of all batteries are in the same direction: when the batteries in the charging box are about to be full, take out the batteries in time:

5. When the machine is running, please do not put your hands into the battery sorting track to avoid hurting your fingers:

6. When the equipment runs abnormally or stops for no reason, you should first press the emergency stop button, then check the abnormality of the equipment and problems after cleaning. Release the emergency stop button to return the manipulator to the origin and the system will pause. Then press the green button to make the system resume active operations,

If the system does not work, you can press the system reset button to resume normal operation.

7. When a certain type of battery is sorted and there is no material alarm, press and hold the green button for 3 seconds to make the material empty. After 30 seconds, the system can automatically enter the terminal mode and actively sort the remaining materials into the trough.

8. Before each operation of the equipment, the battery of the sorter should be cleared, press the system reset button to bring the equipment to the initial state, and then press the operation button:

9. Ensure that the positive and negative terminals of the batteries to be sorted are clean, and prevent dust and other debris from contaminating the detection probe to ensure the accuracy of the measurement data:

10. To ensure measurement accuracy, it is recommended to clean the probe with alcohol every 4 hours and replace the probe once a month under normal production conditions:

11. To ensure high-precision measurement of the instrument, please reset and calibrate the instrument regularly.