Nickel Hydride Batteries.Introduction to technical rules for operating safety of polymer lithium-ion batteries

Since polymer lithium batteries are soft packaging, in order to ensure that the performance of the battery is not damaged and to avoid accidents, the following safety operating rules must be strictly followed.

Since polymer lithium batteries are soft packaging, in order to ensure that the performance of the battery is not damaged and to avoid accidents, the following safety operating rules must be strictly followed. 1. About packaging materials 1. Aluminum foil packaging materials are easily punctured by sharp parts, such as nickel sheets and sharp needles. 2. It is forbidden to collide with the battery with sharp parts. 3. The working environment should be clean and avoid the presence of sharp parts. 4. It is forbidden to pierce the battery with nails and other sharp objects. 5. It is forbidden to transport or store the battery with metal objects, such as necklaces, hairpins, etc. 2. About the four corners 1. The top edge is very susceptible to damage 2. It is prohibited to bend the top edge 3. Folding 1. Folding has been completed during the battery production process and passed the sealing test. 2. It is prohibited to open or damage the folded edge. 4. Poles 1. The mechanical strength of the tabs is not extremely strong, especially the aluminum sheet. 2. It is forbidden to bend the tabs 5. Mechanical impact 1. It is forbidden to drop, impact or bend the battery 2. It is forbidden to hit or step on the battery with a hammer 3. It is forbidden to knock or throw the battery 6. Short circuit 1. It is forbidden to short circuit the battery at any time. It will cause serious damage to the battery core. 2. It is prohibited to use metal objects such as wires to short-circuit the positive and negative terminals of the battery.