AG Coin foot battery

　　Solder foot battery, also known as with foot battery, pin battery, English name battery with soldered battery; battery with pins in Taiwan and Hong Kong are called pins.

　　Usually small electronics, digital products, medical instruments, etc., do storage power for AG Coin batteries need to be welded on the circuit board (PCBA), the battery of the battery is stainless steel with nickel plating: steel with hardness. It's not easy to bend. Nickel plating can be firmly in electronic components and tin is not easy to fall off. Can not directly solder the battery and steel belt link, tin welding is not firm, easy to fall off, small contact area and other shortcomings. Some old technology or urgent use of some small companies with tin welding this is not professional.

　　Battery solder belongs to battery processing:

　　In order to meet the needs of different customers, the battery has a brand high capacity. Point welding must be used in the welding process of connecting with imported batteries. And professional insulation adhesive insulation treatment. In order to avoid the battery installed is a short circuit.

　　Do not stack together to avoid short circuit. The positive and negative poles shall be insulated by casing during storage. Avoid humidity, direct sunlight, do not be exposed to rain, ventilation and dry avoid direct sunlight. Temperature between (-30°C and 35°C)

　　AG Coin battery foot is more complex, the main reason is that the AG Coin battery is too thin processing is not professional, and the negative lithium sheet is directly connected with the negative shell of the battery, so it is easy to happen that the battery is welded bad (internal diaphragm welding caused short circuit) or the welding sheet is easy to fall off the bad phenomenon.